Setting The System Address And Outdoor Unit Address - Panasonic U-16GE2E5 Mode D'emploi

(3) To change the setting, press and hold the SET key for 1 second.
(During this time, the setting in progress indicator (D052) lights.)
(4) Use the UP and DOWN keys to select the number of connected units.
Example: If
The setting range is 1 – 48 units (
* If there is only one outdoor unit, the setting range is 1 – 24 (
(5) Press and hold the SET key for 1 second. (TEST/WARNING turns off.)
(6) Press the HOME key to end the setting process.

8. Setting the System Address and Outdoor Unit Address

* Set the addresses on the outdoor unit control board.
* The system address is set to "1" at the time of shipment.
Setting the address
(1) Please check the wiring condition of the indoor/outdoor control cables.
(2) Set the system address.
1. Select the
2. Use the UP and DOWN keys to select the system address setting.
Example:
3. To change the setting, press and hold the SET key for 1 second.
(During this time, the setting in progress indicator (D052) lights.)
4. Use the UP and DOWN keys to select the system address.
Example: If
The setting range is 1 – 30 (
5. Press and hold the SET key for 1 second. (TEST/WARNING turns off.)
6. Press the HOME key to end the setting process.
(3) Set the outdoor unit address.
1. Select the
2. Use the UP and DOWN keys to select the outdoor unit address setting.
Example:
3. To change the setting, press and hold the SET key for 1 second.
(During this time, the setting in progress indicator (D052) lights.)
4. Use the UP and DOWN keys to select the outdoor unit address.
Example: If
The setting range is 1 – 2 (
5. Press and hold the SET key for 1 second. (TEST/WARNING turns off.)
6. Press the HOME key to end the setting process.
00̲M2̲TestRun̲All.indb 8 00̲M2̲TestRun̲All.indb 8
is displayed, pressing the UP key displays
Outdoor Outdoor
unit unit
1-1 1-2
Indoor/outdoor control cable
Refrigerant tubing
Indoor Indoor Indoor
unit unit unit
(initial settings) menu item to display
(System address is 1.)
is displayed, pressing the UP key displays
-
(initial settings) menu item to display
(Outdoor unit address is 1.)
is displayed, pressing the UP key displays
-
- ).
Outdoor
unit
2-1
Refrigerant tubing
Indoor Indoor
Indoor
unit unit
unit
Fig. 3
).
).
EN - 8
.
- ).
Indoor Indoor
unit unit
.
.
.
.
2012/03/05 15:37:33 2012/03/05 15:37:33