Checking The Initial Settings - Panasonic U-16GE2E5 Mode D'emploi

Table 2
First digit display
(3) For each display, the value can be changed by pressing the UP and DOWN keys.
When the SET keys is pressed for display
(4) Press the HOME key to end the setting process.

5. Checking the Initial Settings

(1) Select the
(2) Press the SET key to display the following:
Example:
(3) With this display, press the UP and DOWN keys to select settings including those for system address, outdoor unit address,
number of connected outdoor units, number of connected indoor units, model, gas type, and automatic address startup.
Table 3
DOWN
UP
*1: Although the value varies depending on the model, please do not change.
*2: Please do not change except the W multi model.
00̲M2̲TestRun̲All.indb 6 00̲M2̲TestRun̲All.indb 6
Contents Sample setting/status display
Year
Month
Day
Hour
Minutes/seconds
, the seconds are reset to zero.
(initial settings) menu item to display
(system address setting)
Status/setting display
System address setting
Outdoor unit address setting
Number of connected outdoor units setting
Number of connected indoor units setting
Model setting (non-modifi able)*
Gas type setting
Refrigerant setting (non-modifi able)*
Generator (setting disabled)*
Model 1 setting (non-modifi able)*
Model 2 setting (non-modifi able)*
Destination setting (non-modifi able)*
Warm water setting (non-modifi able)*
Oil change time display
Single phase setting (non-modifi able)*
Tube connection check (Use for W Multi)*
Heat automatic address setting
Cool automatic address setting
First day of the month
6th minute after the hour
.
Function
1
1
1
1
1
1
1
1
EN - 6
Display meaning
12 (Year 2012)
April
11 AM
2
2012/03/05 15:37:31 2012/03/05 15:37:31