Toro Recycler 20995 Mode D'emploi page 7

2. Squeeze the button on the lever with your thumb
and fully insert the mulch plug into the opening
(Figure 9).
3. Release the button on the lever and ensure that the
top of the lever is lies fully in the switch channel
(Figure 10). If the top of the lever is not in the
switch channel, your mower will not start!
Figure 8
Figure 9
Figure 10
Note: If the lever does not latch properly,
disconnect the wire from the spark plug and check
for and remove any debris buildup in the tunnel.
Product Overview
1. Spark plug
2. Cutting height lever
3. Air filter
4. Fuel tank cap
7
Figure 11
Model 20995
5. Recoil start handle
6. Blade control bar
7. Self-propel drive bar
8. Oil fill/Dipstick