Festo CPX-MMI-1 Mode D'emploi page 18

Removing the handheld:
4
The handheld can be removed from the
support with a gentle push.
Fitting onto a wall
Fasten the support to a flat fastening surface with two
S
countersunk screws of size M3x6 or longer. Tighten the
screws with max. 0.6 Nm. Make sure that there is suffi
cient space for connecting the cable and for inserting
the handheld.
1
Dimensions of the
fastening holes
18
85
Festo CPX−MMI−1 0305NH English
1