fiac TDRY 6-18 Manuel D'instructions page 63

If the dryer is to be dismantled, it has to be split into homogeneous groups of materials.
Part
Refrigerant fluid
Canopy and Supports
Refrigerating compressor
Alu-Dry Module
Condenser Unit
Pipe
Fan
Valve
Electronic Level Drain (optional)
Insulation Material
Electric cables
Electric Parts
We recommend to comply with the safety rules in force for the disposal of each type of material.
The chilling fluid contains droplets of lubrication oil released by the refrigerating compressor.
Do not dispose this fluid in the environment. Is has to be discharged from the dryer with a suitable
device and then delivered to a collection centre where it will be processed to make it reusable.
7.1.1 TDRY 6-18 /AC Dryers Dimensions
7.1.2 TDRY 12-18 Silver /AC Dryers Dimensions
7.1.3 TDRY 25 /AC Dryers Dimensions
7.1.4 TDRY 32 /AC Dryers Dimensions
7.1.5 TDRY 49 /AC Dryers Dimensions
7.1.6 TDRY 63-80 /AC Dryers Dimensions
7.1.7 TDRY 105/AC Dryers Dimensions
7.1.8 TDRY 143-168 /AC Dryers Dimensions
7.1.9 TDRY 63-80 /WC Dryers Dimensions
7.1.10 TDRY 105/WC Dryers Dimensions
7.1.11 TDRY 143-168 /WC Dryers Dimensions
6.4 DISMANTLING OF THE DRYER
Material
R404A – HFC, R134.a – HFC, Oil
Carbon steel, Epoxy paint
Steel, Copper, Aluminium, Oil
Aluminium
Aluminium, Copper, Carbon steel
Copper
Aluminium, Copper, Steel
Brass, Steel
PVC, Aluminium, Steel
Synthetic rubber without CFC, Polystyrene, Polyurethane
Copper, PVC
PVC, Copper, Brass
7.1 DRYERS DIMENSIONS
GB