fiac TDRY 6-18 Manuel D'instructions page 39

1.4 INSTRUCTIONS FOR THE USE OF PRESSURE EQUIPMENT ACCORDING TO
To ensure the safe operation of pressure equipment, the user must conform strictly to the above directive
and the following :
1. The equipment must only be operated within the temperature and pressure limits stated on the
manufacturer's name/data plate.
2. Welding on heat-exchanger is not recommended.
3. The equipment must not be stored in badly ventilated spaces, near a heat source or inflammable
substances;
4. Vibration must be eliminated from the equipment to prevent fatigue failure.
5. Automatic condensate drains should be checked for operation every day to prevent a build up of
condensate in the pressure equipment.
6. The maximum working pressure stated on the manufacturer's data plate must not be exceeded. Prior
to use, the user must fit safety / pressure relief devices.
7. All documentation supplied with the equipment (manual, declaration of conformity etc.) must be kept
for future reference.
TAMPERING, MODIFICATION AND IMPROPER USE OF THE PRESSURE EQUIPMENT ARE
FORBIDDEN. Users of the equipment must comply with all local and national pressure
equipment legislation in the country of installation.
Once verified the integrity of the packaging, place the unit near the installation point and unpack the
contents.
• To move the packaged unit we suggest to use a suitable trolley or forklift. Transportation by hands is
discouraged.
• Keep the dryer always in vertical position. Turning it upside down some parts could be irreparably
damaged.
• Handle with care. Heavy blows could cause irreparable damage.
The packaging materials are recyclable.
Each single material must be properly disposed in a manner complying with the rules in force
in the destination country.
PED DIRECTIVE 97/23/EC
2.1 TRANSPORT
2.2 STORAGE
Even when packaged, keep the machine
protected from severity of the weather.
Keep the dryer in vertical position, also when
stored. Turning it upside down some parts could
be irreparably damaged.
If not in use, the dryer can be stored in its
packaging in a dust free and protected site at a
maximum temperature of 45 °C, and a specific
humidity not exceeding 90%. Should the
stocking time exceed 12 months, please contact
the manufacturer.
GB