Rizzoli RE - RVE Série Manuel D'utilisation page 88

To regulate the plinth recess to the front release
the bolt that keep fixed the plinth to the cooker:
the bolts are screwed vertically from the bottom
to the top. Then scroll the plinth in the chosen
position and close the bolts. For this operation it
is necessary an hex key size 8 (see picture 22). It
is necessary to pay attention to not remove com­
pletely the bolts, release them only for what it is
necessary.
2.18 TELESCOPIC PLINTH REGULATION
The wood fired cookers can have on demand a
special woodbox enlarged integrated with the
A
x2
C
x2
Picture 23 – Regulation of the telescopic plinth.
N.8
Picture 22 – Regulation of the plinth recess to the
body of the cooker.
plinth. In this case it is anyway possible the regula­
tion of the height of the plinth but not the regula­
B
D
10 mm
86