Unpacking; Disposal Of The Packaging; Demands On The Installation Location - Beem 3000 Serie Mode D'emploi

Setting up and connection

Unpacking

EN

Disposal of the packaging

Demands on the installation location

46
Proceed as follows when unpacking the appliance:
Remove the teapot, the lid of the water tank, the water tank
‹
and the drip tray with cover from the box carton.
Remove the packaging material.
‹
The packaging protects the appliance from transport
damage. The packaging materials have been selected according
to environmental and waste disposal aspects and can therefore
be recycled.
The return of the packaging to the material cycle helps conserve
raw materials and reduces the production of waste. When no
longer required, dispose of the packaging materials in accord-
ance with the local regulations in force.
NOTE
Keep the original packaging, if possible, during the warranty
►
period in order to be able to pack the appliance properly in
the event of a warranty claim. Transport damage will void all
warranty claims.
For safe and trouble-free operation of the appliance, the installa-
tion location must satisfy the following requirements:
The appliance must be set up on a horizontal, heat-resistant
■
and stable surface.
Do not install the appliance in a hot, wet or very humid envi-
■
ronment or in the vicinity of inflammable materials.
Stand the appliance on a water-resistant surface. Splashing
■
water can cause damage.
BEEM - Elements of Lifestyle