Publicité
Les langues disponibles
Les langues disponibles
MADE IN FRANCE
TUNGSTEN ELECTRODE WELDING WITH INERT GAS (TIG MODE)
CONNECTIONS AND RECOMMENDATIONS
TIG welding requires a torch as well as a gas bottle equipped with a regulator
Connect the earth clamp to the positive connector (+) at the back of the product. Connect the torch power cable to the negative connector (-) , as
well as the control connectors for the torch and the gas.
Ensure that the torch is equipped and ready to weld and that the consumables (Vise grip, ceramic gas nozzle, collet and collet body) are not worned
out.
TRIGGER MODE
2T
T1
Bouton principal
Main button
Contacteur
Contactor
Prégaz
EV
Pregas
4T
Bouton principal
Main button
Contacteur
Contactor
Prégaz
EV
Pregas
EXAGON (TIG MODE)
Make sure there is no voltage when connecting the EXAGON and EXATIG. If there is voltage the connection will not function.
The remote control option or pedal option has not been designed to operate on the EXAGON when the EXATIG is connected. The
current can be adjusted by using the potentiometer torch connected to the EXATIG which controls the EXAGON's current level.
USE WITH EXAGON GENERATOR
Press the button
several times until LED indicators lights up and the
symbol
.
WELDING STETTINGS
1. Welding intensity settings :
Adjust the downslope duration using the secondary knob
to the diameter and the type of assembly to be carried out. The current
setpoint is indicated on the right side display.
2. Welding downslope settings :
Adjust the downslope duration using the secondary knob (X).
indicator shows the chosen settings, the right display indicates the precise
downslope duration in seconds.
ARCING :
HF ignition with EXATIG Using the torch, approach the electrode to the metal piece without making any contact to start the arc.
18
T2
T1
Postgaz
Postgas
EXATIG HF
T2
Postgaz
Postgas
T3
T4
according
. The
VRD
V
A
press 3 s
Basic
7018
0
Rutile
6013
Cellulosic
6010
ARC FORCE
INDUCTANCE
-9
+9
The grey areas are not useful for this mode.
EN
M A D E I N F R A N C E
MMA
MIG
TIG
Gouging
CV
MODE
press 3s
press 3s
setup
memory
Publicité
