Daily Use - AEG FAVORIT 99709 M0P Notice D'utilisation

Lave-vaisselle
Masquer les pouces Voir aussi pour FAVORIT 99709 M0P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16
www.aeg.com

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate
the appliance.
• If the display shows the salt
refilling message, fill the salt
container.
• If the display shows the rinse aid
refilling message, fill the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
9.1 Using the detergent
A
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
B
C
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1. Press the on/off button to activate
the appliance.
2. Close the appliance door.
3. Select a programme. The
programme ECO is always the
default programme.
4. Select applicable options if desired.
5. Press the OK key, the programme
starts.
If the programme is applicable to the
option TimeSaver, you have to confirm
Fast or Normal.
How to delay the start of a
programme
It is not possible to set the delay start
with the MyFavourite programme.
1. Set the programme.
2. Press the Delay key.
The delay time is indicated in the upper
right corner of the display.
3. Press repeatedly the Delay key to
increase the number of hours of the
delay start. You can delay the start of
the programme from 1 to 24 hours.
4. Press the OK key to confirm and to
start the countdown. When the
countdown is completed, the
programme starts.

Publicité

Table des Matières
loading

Table des Matières