Daily Use - AEG GS60AIS222 Notice D'utilisation

60 www.aeg.com
6.3 Filling the rinse aid dispenser

7. DAILY USE

1. Open the water tap.
2. Turn the programme knob until the
programme marker is aligned with a
programme on the control panel.
Make sure that the appliance is in
setting mode, refer to 'SETTING
AND STARTING A PROGRAMME'.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
A B
D
C
A B
A
+ -
C
D
1. Press the release button (D) to open
the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 or 6 (highest quantity).
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent
tablets, activate the Multitab op-
tion
5. Set and start the correct programme
for the type of load and the degree
of soil.