Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

62 www.aeg.com
Starting a programme with
delay start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you
want to set (from 1 to 19 hours).
• The delay time flashes in the dis-
play.
3. Press Start. The countdown starts.
• The delay time stops flashing in
the display. The countdown starts
to decrease with steps of 1 hour.
• The phase indicators of the set
programme go off.
• When the countdown is completed,
the programme starts.
– The indicator of the phase in opera-
tion comes on.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
Press Delay again and again until the
display shows the programme duration
and the phase indicators of the set pro-
gramme come on. The programme
starts.
Cancelling the programme
Press and hold Multitab and Delay until
the programme duration flashes in the

8. HINTS AND TIPS

8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these miner-
als.
display and the phase indicators of the
set programme come on.
Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.
At the end of the programme
When the programme is completed, the
display shows 0 and the phase indicators
go off.
1. Deactivate the appliance. Turn the
programme knob until the pro-
gramme marker is aligned with the
off position.
2. Close the water tap.
• If you do not deactivate the
appliance, after three minutes
from the end of the pro-
gramme:
– All the indicators go off.
– The display shows one hori-
zontal status bar.
This helps to decrease the ener-
gy consumption.
Press one of the buttons, the dis-
play and the indicators come on
again.
• Let the dishes become cold
before you remove them from
the appliance. Hot dishes can
be easily damaged.
• First remove the items from
the lower basket, then from
the upper basket.
• There can be water on the
sides and on the door of the
appliance. Stainless steel be-
comes cool more quickly than
the dishes.
The dishwasher salt keeps the water
softener clean and in good conditions. It
is important to set the right level of the
water softener. This makes sure that the
water softener uses the correct quantity
of dishwasher salt and water.

Publicité

Table des Matières
loading

Table des Matières