Gram COMPACT 220 Série Mode D'emploi page 30

The set-up place must be level and horizontal.
For versions with legs, use the adjustable legs to make sure that the product stands
level and upright, see Fig.3.
For versions with castors, the locking devices of the two front castors must be activated,
when the product is in place, see Fig.3. The base must be level, and the product may not
be placed on frames or the like.
Fig. 3
Cabinets equipped with a glass door, must be fastened to a stable surface to ensure the
cabinet does not tilt, when the door is open. Brackets for fastening are supplied with the
cabinet (fasteners not supplied, use fasteners according to wall material/type).
See how to mount brackets in Fig.4
Fig. 4
To ensure that users, surroundings and stored items are not injured/damaged if the
cabinets tilts, these brackets must be mounted.
765042402 Rev. 000
475
Upper edge of cabinet
30