Characteristics - ENAR QP Manuel D'instructions

2

CHARACTERISTICS

The vibrating screeds are used for the vibrating and the finishing of the floors in the construction industry
and for the finishing of parts in the pre-cas industry. The double beam screed depth-effect is from 15 to 25
cm. For very thick concrete layers, we recommend to use pokers at the same time in order to obtain the
right compaction and consistence of the concrete mass as well as its finishing.
The vibrations come from the vibrating group that consists on an exciter powered by a petrol engine or an
electric motor.
Double beam screed consists on a set of aluminium or steel beams (sold separately) able to extend from
2,7 or 3,5 meters to 4,5 or 6 meters length. To increase the length it is necessary to free the vibrating group
clamps and to pull the beams to get the required length. Then, fix the vibrating group clamps again.
The vibrating group fit in the beams and is fixed to them with two clamps (one on each side).
It is possible to choose a vibrating group powered by an electric vibrator or a petrol engine. In the case of
the petrol engine, vibration is produced by an eccentric weight, assembled with bearings, inside a steel
housing. This housing also works as an oil tank for lubricating the bearings. A belt transmits the movement
from the engine (assembled on four silent-blocks to isolate it from vibrations) to the pulley of the eccentric
weight to produce the vibration.
There is a hook on each edge of the beam where the pulling handle must be inserted for pulling the screed
while working.
▼ characteristics
Motor
Frequency (rpm)
Beam length (m)
Vibrating group weight (kg)
Centrifugal force (kp)
Acoustic pressure Lpa (dB)*
Acoustic power Lpa (dB)*
Hand-arm vibration (m/s
Uncertainly K (m/s
Time from which precautions
must be taken
Time limit of continued use
(hours)
***S/L=no time limitation, taking as a reference a working period of 8 hours a day.
*Noise values measured at the
workstation: 1,6m over the floor
and 0,2m by the ear of the user.
**Vibration measured in the handle
of the vibrating unit (as shown in
the picture).
EXTENSIBLE DOUBLE BEAM VIBRATING SCREEDS
ELECTRIC SCREED
Model ►
QP
EXTERNAL
VIBRATOR
BM300
3000
2,5-4,5 / 3,5-6
29,8
310
<70
-
2
)** 9,4
2
)
1,35
0,56
(hours)
2,26
PETROL SCREED
QPM QGH
EXTERNAL
HONDA GX160
VIBRATOR
UT1 QX4
BM300/M
3000 7000
2,5-4,5 / 3,5-6 2,5-4,5 / 3,5-6
30 47,2
310 300
<70 115
- 122
9,4 1,97
1,35 1
0,56 S/L***
2,26 S/L***
QGR
ROBIN EX17
7000
2,5-4,5 / 3,5-6
47,5
300
115
122
1,97
1
S/L***
S/L***
en
3
3