Variable Inner Doors; Bottle Drawer; Special Compartment - V-ZUG ROYAL 51018 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Products for freezing should not be bro-
n
ught into contact with products which
are already frozen. Products which have
been thawed out must not be re-frozen
because foodstuffs can spoil.

Variable inner doors

The cover inserts (Figure 1) in the inner
doors can be adjusted somewhat and offer
the option of a customized setting. To
change the location of the inserts and
bottle holder: first lift upwards and lift out,
then set the required height and replace in
the reverse sequence. Please note that the
location of the cover of the uppermost
cover cannot be adjusted.
1

Bottle drawer

In this third zone which has an about 4-
5°C higher temperature than the refrigera-
tion space the drinks are retained at the
correct, safe drinking temperature of
approx. 10°C.
Pull out the basket: (Figure 2)
– Pull out the drawer as far as it will go.
– Use the strap on the basket to inch it to
the top.
Insert the basket:
– Hold the basket against the inside wall
opposite the hinges, raising the basket
slightly forward.
– Position basket with the rear edge on
the rails and push together inwards as
far as they will go.
– Lock front basket in position by pressing
on the operating strap.
2

Special compartment

The special compartment (Figure 3) can be
used for storing various fresh food produc-
ts up to three times longer than a conven-
tional fridge. The temperature in the speci-
al compartment in beetween 0° C and 3°C
(by 5° C selectet temperature value).
Removing an fitting the special compart-
ment: Pull out the special compartment
fully, lift an remove laterally (Figure 4)
Note: (+ Figure 5)
The humidity can be infinitely adjusted:
– Small humidity Symbol (left) low humidi-
ty (about 45%)
– Large humidity symbol (right) higher
humidity (max. 90%)
43

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Royal 923

Table des Matières