● Alcohol detected (see the fold-out page, Figure 2: H). The red
indicator also lights up. Press the
next measurement.
4.6.2 Taking a manual breath sample (optional)
If the subject cannot provide the required minimum volume of breath,
manual sampling can be activated.
To take a manual breath sample:
1. Follow steps one to four of the process for taking an automatic
breath sample.
2. Briefly press the
once breath sampling has begun.
In the results display, MANUAL is also displayed.
4.6.3 Taking a passive breath sample (optional)
During passive sampling, sampling is manually activated by the user
of the device. Possible applications for this include testing the ambient
air or a person's breath for the presence of alcohol.
To take a passive breath sample:
1. Hold the ready device without the mouthpiece in the air to be
analyzed.
2. Briefly press the
If alcohol is detected, the message ALCOHOL is displayed
and the red LED lights up.
If no alcohol is detected, the message NO ALC. is displayed
and the green LED lights up.
In the results display, PASSIVE is also displayed.
Dräger Alcotest
button if the circular progress bar is displayed
button to start the measurement.
®
7000
button to continue with the
|
Use
15