HASE LIMA iQ Notice De Montage page 27

NOTE: DISTANCE TO NON-FLAMMABLE MATERIALS
To avoid obstructing air circulation around the stove we recommend a
clearance of at least 5 cm in front of and next to the stove.
NOTE: TEMPERATURE-SENSITIVE MATERIALS
Temperature-sensitive materials such as glass or plastic may require greater
clearances than the safety distances specified.
The safety distances specified also apply for highly-insulated components
with a thermal insulation resistance of R ≤ 8 m²K/W.
2.9 Technical data
LIMA iQ, SILA iQ, SILA PLUS iQ technical data on:
Output, emissions, and chimney calculation (EN 13384-Part 1/2)
Test bed values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Flue Gas Outlet Temp�
Flue Gas Mass Flow Rate
Min� Supply Pressure at Nominal Thermal Output**
Efficiency
CO2 content
CO content
Particulate matter
OGC
NO
X
Min� required combustion air volume
Heatable living space
*at 13% O
2
** The additional supply pressure required for the combustion air connection with the HASE Air System:
at the back= 3 Pa
LIMA iQ+, SILA iQ+, SILA PLUS iQ+ technical data on:
Output, emissions, and chimney calculation (EN 13384-Part 1/2)
Test bed values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Flue Gas Outlet Temp�
Flue Gas Mass Flow Rate
Min� Supply Pressure at Nominal Thermal Output**
Efficiency
CO2 content
CO content
Particulate matter
OGC
NO
X
Min� required combustion air volume
Heatable living space
*at 13% O
2
** The additional supply pressure required for the combustion air connection with the HASE Air System:
at the back= 3 Pa
Multiple allocation of the chimney is possible, see point 5.7.1 in the Instructions
for use "Connection of Multiple Devices in Direct Vent Operation."
Weights:
Stove type Cladding
LIMA iQ, LIMA iQ+ Ceramic / Soapstone
SILA iQ, SILA iQ+ Steel / Ceramic / Soapstone
Stove type Cladding
SILA PLUS iQ, SILA PLUS IQ+ Steel
Heat retaining block -
Testing fuel: Unit
firewood
5,5 kW
5,5 kW
199 ˚C en
239 ˚C
5,5 g/s
12 Pa
84 %
8,8 %
≤ 1250 mg/Nm³
≤ 40 mg/Nm³
≤ 120 mg/Nm³
≤ 200 mg/Nm³
21 m³/h
17-68 m
2
Testing fuel: Unit
firewood
6 kW
6 kW
235 ˚C
291 ˚C
5,77 g/s
12 Pa
81,5 %
8,95 %
≤ 500 mg/Nm³
≤ 15 mg/Nm³
≤ 70 mg/Nm³
≤ 180 mg/Nm³
25 m³/h
20-80 m
2
Weight [kg]
195 / 220
140 / 180 / 200
Weight [kg]
150
60
27