HASE LIMA iQ Notice De Montage page 23

1 Notices and explanations of symbols
1.1 General information
▪ The installer and operator must read the operating
instructions prior to installing and using the stove.
▪ Failure to observe the operating and installation instructions
will void the warranty. Any structural modifications
to the stove by the operator is prohibited.
▪ The following regulations and documents must be observed when
installing and removing the fireplace, connecting the combustion air
controller and during operation:
► Building code
► Chimney calculations as per DIN EN 13384-1 and
DIN EN 13384-2
► Technical documentation for the stove
► Local ordinances as well as all necessary, applicable national and
European standards�
▪ Please note and observe all warnings and safety notes.
▪ Always use original replacement parts.
The graphics and images used in this document are intended for illustration
purposes only and are not to scale.
All texts, images, graphics and contents of these operating instructions are
protected by copyright.
These must not be altered, copied, duplicated or published in whole or in part
without prior written approval.
Technical changes and misprints reserved.
1.2 Explanation of symbols
Warnings
DANGER
This symbol alerts you to a potentially hazardous situation.
Non-compliance with this warning could result in serious injury
or even death.
WARNING
This symbol alerts you to a potentially hazardous situation.
Non-compliance with this warning could result in serious injury
or even death.
WARNING: ELECTRICAL VOLTAGE
This symbols warns of electrical voltage.
Non-compliance with this warning could result in serious injury
or even death.
CAUTION
This symbol alerts you to a potentially hazardous situation.
Non-compliance could result in minor or
moderate injury.
CAUTION: HOT SURFACES
This symbols warns of hot surfaces. Non-compliance could result in minor or
moderate injury.
NOTE
This symbols warns of potential property damage.
Non-compliance could result in property damage.
Other notices
INFO
This symbol indicates helpful information and tips.
SYMBOL:
Chapter with this symbol only apply to iQ+ series stoves with the „Blue
Angel" seal of approval.
tigthen firmly
tigthen gently
by eye
made to measure
1.3 General safety notes
IMPORTANT INFORMATION FOR THE TARGET GROUP
These installation and service instructions are intended for heating and stove
professionals. All information in these instructions must be observed.
Non-compliance can result in product damage and personal injury
or even risk of death:
► Read the operating and installation instructions prior to
installation and assembly�
► Observe all safety instructions and warnings�
► Have the stove serviced at least 1 time per year�
SETUP, INSTALLATION AND ASSEMBLY
Observe these notes during setup, installation and
assembly:
► Modifying any parts of the stove will void the approval�
► Always use original replacement parts�
► Do not seal the combustion air vents on the stove�
► Flammable flooring materials (e.g. wood, laminate, carpet,)
must be protected with a spark protection plate made of
non-combustible material (e�g�, safety glass, steel, stone)�
► The stove is only intended to be installed free-standing�
Do not place in alcoves or cover the stove�
INITIAL OPERATION
The stove must be inspected by a specialist company prior to initial opera-
tion:
► Observe the country-specific and local regulations and
standards�
align top and bottom
align laterally
align generally
disposing
en
23