Connecting Speakers - JVC FS-J60 Manuel D'instructions

AM antenna
1 2
3
AM loop antenna
(supplied)
1
If the cords are covered with insulation,
remove a short section of insulation at the
end of each cord by twisting and pulling it
off.
2
Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
3
Turn the AM loop antenna until you have
the best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. The AM
loop antenna must remain connected.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
7

Connecting Speakers

Vinyl-covered wire
(not supplied)
Speaker
Speaker cord
FOR FS-J60:
1
2
Gray
RIGHT
LEFT
cord
MAIN SPEAKERS
CAUTION: SPEAKER IMPEDANCE 6 -16
Blue
INPUT INPUT
Right speaker
FOR FS-J50:
SPEAKERS
RIGHT
SPEAKER
IMPEDANCE
6 - 16
Right speaker
3
RIGHT
LEFT
Red
Speaker
SUBWOOFERS
cord
Black
INPUT INPUT
Left speaker
LEFT
Speaker cord
Left speaker