8.
Settings
All settings can be done with simple equipment, e.g. screwdriver, jaw wrench, Allen
wrench etc.
8.1 Welding time
To adjust the welding time, turn the
adjustment screw:
Clockwise,
to increase the welding time.
Counter clockwise,
to decrease the welding time.
8.2 Strap tensioning
To adjust the tension force, turn the
adjustment screw on the tension motor:
Clockwise,
to decrease the tension.
Counter clockwise,
to increase the tension.
Attention! Do not exceed the adjustment screw too far.
TP 600
H TP 600 EU 37/11
30