Titan TP 600 Mode D'emploi page 21

2. General
Many thanks for your confidence in the technology of
These operating instructions are meant to facilitate becoming familiar with the TP 600 and
the intended use. These operating instructions comprise important information on how
the tool is used properly and economically. Meeting instructions helps reduce risks and
also increase the reliability and life of the tool risks, repairs and downtimes.
The operating instructions must be available on the job site of the tool. They must be read
and applied by all persons working with the tool. Such works include operation,
troubleshooting and maintenance.
Apart from the operating instructions and the regulations for the prevention of accidents
applicable in the operator's country and on the job site the acknowledged technical rules for
safety-related and professional work have to be observed.
Explanatory notes on the warning and instruction symbols:
Caution!
It is used in case of hazards
to life and health.
Attention!
It is used in case of hazards which
might cause damage to property.
Note!
It is used for general indications and indications whose disregard
might cause disruptions in the operational sequences.
The manufacturer reserves the right to make changes to the scope of delivery
at any time for the purpose of improving the product.
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2011 all rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co. KG.
TP 600
TITAN Umreifungstechnik GmbH & Co. KG!
H TP 600 EU 37/11
21