Titan TP 600 Mode D'emploi page 29

7.1 Check the seals regular
The tool must be set correctly to ensure maximum performance. It is essential to
set the welding time correctly.
Settings depend on strap dimensions and strap quality; they may vary. For the reasons
mentioned above TITAN cannot define generally applicable parameters.
The following figure shows a correctly welded seal.
Check the seals regular,
for an evenly performed welding seal
for strap splitting [generally found on lower grade strapping]
Inaccurate performed seals (see example below) could result in injuries!
Welding time to short
Welding time to long
TP 600
H TP 600 EU 37/11
29