JVC KD-NX1R Manuel D'instructions page 88

Navigation operation
If no other entries are available, the unit completes the road-
name.
To accept the entry, press and hold the right rotary control
for more than 2 seconds or select the small tick
press the right rotary control
If the complete road-name was previously entered or was au-
tomatically completed, the program switches to either road-
distinguishing list or to route menu.
If an incomplete location entry was confirmed, the road selec-
tion list is displayed.
The road nearest to the entry appears in capital letters in the
road selection list.
The scroll marks indicate that more roads are available for se-
lection in alphabetical order.
Select the road by turning the right rotary control
to confirm.
If the entry is unequivocal, the program switches to route
menu.
The road-distinguishing list is displayed if the selection is am-
biguous.
86
and briefly
.
and press
Select the required place using the right rotary control
press to confirm.
The program switches to route menu.
Entering the destination centre
Using the right rotary control
confirm.
If the place selected only has one centre, the program switch-
es immediately to route menu.
If the number of centres is less than 10, the centre list is dis-
played.
Select the centre by turning the right rotary control
press to confirm.
If the number of centres is greater than 9, the program switch-
es to centre entry.
and
, select and press to
and