Selecting Automatic Tracking; Selecting/Deleting Direct Programming; Switching Mute On/Off - JVC KD-NX1R Manuel D'instructions

Radio operation

Selecting automatic tracking

Only applies when TMC is switched off.
In all modes and wavebands, automatic tracking can be
switched on by pressing the
2 seconds.
To switch on automatic tracking in the TP menu, press the
multifunction button repeatedly until
displayed.
Attention: If a TP transmitter has already been
programmed directly, it will once again be
selected as the TP transmitter.

Selecting/deleting direct programming

Only applies when TMC is switched off.
Activate the TP menu.
Selecting: Press the multifunction button.
Using the right rotary control
transmitter. After a short delay and without actuation, the
120
button for more than
is
, select the desired TP
selected transmitter is accepted.
Deleting: Press the multifunction button.
Using the right rotary control
press to confirm. After a short delay and without actuation,
the direct programming is deleted.
Quit the TP menu.

Switching mute on/off

After selecting a TP or EON transmitter, the mute function
can be activated by briefly pressing the
Thereafter, only traffic announcements and navigation
announcements will be switched through. After pressing
the button again, muting is cancelled.
, select and
button.