Activating/Quitting The Tp Menu; Switching Tp On/Off - JVC KD-NX1R Manuel D'instructions

When TMC is switched on:
• With TMC, the unit is capable of selecting a suitable
traffic programme transmitter automatically. If possible, a
TMC station is selected as the traffic programme
transmitter. The selected TMC station usually offers the
best traffic information for the region in which you are
travelling. If no TMC station is available, the traffic
programme transmitter with the strongest signal is
selected.
If an RDS transmitter is equipped with a traffic programme,
this is indicated on the display by
An inverse TP appears on the display to indicate that the
traffic programme is active.

Activating/quitting the TP menu

Activating: Press the
cannot be transmitted).
Press the multifunction button.
Quitting: Press the
automatically terminated after 8 seconds without actuation.
.
button (traffic announcements
button or the TP menu will be

Switching TP on/off

In all modes and wavebands, TP can be switched on/off by
pressing the button for more than 2 seconds.
TP can also be switched on/off in the TP menu.
Switching on: To switch on TP in the TP menu, press
the multifunction button repeatedly until
displayed.
Switching off: To switch off TP in the TP menu, press the
multifunction button repeatedly until
displayed.
TP is switched off after returning to normal display.
Radio operation
is
is
119