Automatic Cleaning Using The Pyrolytic Function - SCHOLTES BC 99DT P XA Mode D'emploi

Automatic cleaning using the
PYROLYTIC function
During the PYROLYTIC cycle, the internal
temperature of the oven reaches 500°C. The
pyrolytic cycle is activated, burning away food and
grime residues. Dirt is literally incinerated.
Keep children well away from the appliance during
the automatic cleaning cycle, as the surfaces may
become extremely hot. Particles may ignite inside
the oven due to the combustion process. Particles
may ignite inside the oven as a result of the
combustion process. This is not a cause for
concern; it is a normal process and is completely
safe.
Before initiating the PYROLYTIC mode:
! We recommend the duration of the first automatic
cleaning cycle is set to 120 minutes.
! The oven should be cold. If the oven is too hot, the
pyrolytic cycle may not start. Wait for the oven to
cool down.
• Remove larger food residues from inside the oven
using a damp sponge. Do not use detergent.
• Remove all accessories.
• Remove the DIVIDER.
• Do not leave tea towels or pot holders on the oven
handle.
! The cycle will only begin once the oven door has
been closed.
To start the PYROLYTIC cycle, turn the
EXTRALARGE SPACE FUNCTION knob to
Press the button. The SET TIME button may be
used to select the desired cleaning level. There are
three default time settings, which cannot be
modified:
1. Economy (ECO): turn the knob towards "-".
Duration: 1 hour.
2. Normal (NOR): initial level. Duration: 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards "+".
Duration: 2 hours.
4. Press the button to confirm.
The end of the PYROLYTIC cycle may be
programmed in the same way as a normal cooking
cycle (see Programming the automatic cleaning end
time).
Safety devices
• The icon on the display, when lit, indicates
that the oven door was automatically locked as soon
as the temperature reached a high value.
• If a malfunction occurs, the heating elements will
be switched off.
• Once the oven door has been locked, it will no
longer be possible to modify the duration and end of
cycle settings.
Programming the automatic cleaning end time
1. Press the
numerical digits on the DISPLAY begin to flash.
2. Turn the SET TIME knob towards "+" and "-" to
adjust the time.
3. Press the
numerical digits on the DISPLAY begin to flash.
4. Turn the SET TIME knob towards "+" and "-" to
adjust the minute value.
5. Press the
6. Once the set time period has elapsed, the text
END appears on the DISPLAY and a buzzer sounds.
• For example: it is 9:00 and you have selected the
Economy (ECO) PYROLYTIC mode, which has a
default time of 1 hour. The end of the cycle is
scheduled for 12:30, meaning it will begin
automatically at 11:30.
If programming has been scheduled and confirmed,
the and
and the PYROLYTIC end time will appear alternately on
.
the DISPLAY.
At the end of the automatic cleaning cycle,
you will have to wait until the temperature inside the
oven has cooled down sufficiently before you can
open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven;
remove them with a damp sponge once the oven
has cooled down completely. If, on the other hand,
you wish to make use of the residual heat inside the
oven, you do not have to remove the dust deposits
as they are completely harmless and will not affect
your food in any way.
button until the icon and the two
button again, until the other
button again to confirm.
buttons will be illuminated. The duration
GB
31