Description; Purpose; Overview; General Power Tool Safety Warnings - GreenWorks CKF301 Manuel Opérateur

EN
1

DESCRIPTION

1.1

PURPOSE

The polesaw is intended for cutting the branches of standing
trees but not intends for cutting woods as normal chainsaw.
This pole hedge trimmer is intended for cutting and trimming
hedges and bushes in domestic use.
1.2

OVERVIEW

6
3
2
4
1
Trigger
1
Lock-out button
2
Pole
3
pole saw handle
4
Collar
5
Extension pole
6
Guide bar cover
7
Oil tank cap
8
2 GENERAL POWER TOOL
SAFETY WARNINGS
Do not operate near electrical power lines. The unit has not
been designed to provide protection from electric shock in
the event of contact with overhead electric lines, Consult
local regulations for safe distances from overhead electric
power lines and ensure that the operating position is safe
and secure before operating the saw chain pole pruner.
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
8
7
9
10
12
13
14
5
11
Chain
9
10 Bar
11 Scabbard
12 Blade
13 Pivoting button
14 Hedge trimmer head
15 Blade cover
WARNING
WARNING
English
The term "power tool" in the warnings refers to your battery-
operated (cordless) power tool.
2.1

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2.2

ELECTRICAL SAFETY

• Do not expose power tools to rain or wet
conditions.Water entering a power tool will increase the
15
risk of electric shock.
2.3

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A lapse of attention
while operating power tools may result in serious
personal injury.
• Use personal protection. Always wear eye protection.
Protective products such as dust mask, non-skid safety
shoes, hard hat or hearing protection used appropriately
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in
the off position before connecting to power source
and/or battery pack and when picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch on
invites accidents.
• Do not over-reach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
2.4

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
4