Technical Data; Limited Warranty - GreenWorks CKF301 Manuel Opérateur

Problem Possible cause
The machine has
damage.
The motor is on,
blades do not
move.
The blades are
blocked.
The parts are loos-
There is too much
en.
noise and/or vibra-
tion during opera-
tion.
The parts have
damage.
17

TECHNICAL DATA

Category
Voltage
Guide bar length
Chain pitch
Chain gauge
Chain oil capacity
Weight (without battery
pack)
Chain
Guide bar
Category
Voltage
No load speed
Blade length
Cutting capacity
Weight (without battery
pack)
Battery model
Charger model
The recommended ambient temperature range:
English
Solution
Do not use the ma-
chine and speak to
service center.
Remove battery
pack then clear
blockage from the
blades.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
chine and speak to
service center.
Pole saw
40V
8'' (203 mm)
3/8" (9.5 mm)
0.050''(1.27 mm)
50 ml
8.38 lbs. (3.8 kg)
91PJ033X / CL15033X
080NDEA318 /
M1500833-1318TL
Pole hedge trimmer
40V
2800 (±10%) SPM
20''
1.1"
9.57 lbs. (4.3 kg)
29652 and other BAF series
29692 and other CAF series
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
18

LIMITED WARRANTY

LIMITED WARRANTY
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-888-909-6757.
15
Temperature
-4°F (-20°C) - 158°F (70°C)
6.8°F (-14°C) - 104°F (40°C)
39°F (4°C) - 113°F (45°C)
39°F (4°C) - 113°F (45°C)
32°F (0°C) - 73°F (23°C)
6.8°F (-14°C) - 113°F (45°C)
3
YEAR
ANS
GARANTIE
LIMITÉE
EN