Description; Purpose; Overview; Important Safety Instructions - GreenWorks STE302 Manuel D'opérateur

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and
other similar vegetation at or around ground level. The
cutting plane must be approximately parallel to the
ground surface. You cannot use the machine to cut or
chop hedges, shrubs, bushes, flowers and compost.
1.2

OVERVIEW

Figure 1 - 21.
Rear handle
1
Lock-out button
2
Trigger
3
Screw hole
4
Auxiliary handle
5
Upper shaft
6
Coupler
7
Knob
8
Lower shaft
9
Trimmer head
10
Guard
11
Edge guide
12
Release button
13
Positioning hole
14
Lower clamp
15
Battery release button
16
Cut-off blade
17
Spool cover
18
Spool
19
Spool housing
20
Tab
21
Slot
22
Guide slot
23
Hole
24
Bump knob
25
Metal rod
26
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
2 IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING (THIS
POWER TOOL)
English
Read and understand all instructions before using this
product. Failure to follow all instructions listed below
may result in electric shock, fire, and/or serious
personal injury.
• Use only identical manufacturer's replacement parts
and accessories. Use of any other parts may create
a hazard or cause product damage.
• Always wear safety glasses with side shields
marked to comply with ANSI Z87.1. Everyday
glasses have only impact resistant lenses. They are
NOT safety glasses. Following this rule will reduce
the risk of eye injury. Use face mask if operating in
dusty work spaces.
• Avoid Dangerous Environment – Don't expose
power tools to damp or wet conditions. Water
entering a power tool will increase the risk of electric
shock.
• Don't use in rain.
• Keep all bystanders, children, and pets at least 50 ft.
away.
• Dress Properly – Do not wear loose clothing or
jewelry. They can be caught in moving parts. Use of
rubber gloves and substantial footwear is
recommended when working outdoors. Wear
protective hair covering to contain long hair.
• Use right Appliance. Do not use appliance for any
job except that for which it is intended.
• Avoid Unintentional Starting – Don't carry appliance
with finger on switch. Be sure switch is off when
battery plugging in.
• Don't Force Appliance – It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
• Don't overreach – Keep proper footing and balance
at all times.
• Stay alert – Watch what you are doing. Use
common sense. Do not operate this unit when you
are tired, ill or under the influence of alcohol, drugs
or medication.
• Always store idle power tools indoors – When not in
use, power tools should be stored indoors in a dry
and high or locked-up place, out of reach of
children.
• Maintain Appliance With Care – Replace string head
if cracked, chipped, or damaged in any way. Be sure
the string head is properly installed and securely
fastened. Keep cutting edge sharp and clean for
best performance and to reduce the risk of injury.
Follow instructions for lubricating and changing
accessories. Inspect appliance cord periodically,
and if damaged, have it repaired by an authorized
service facility. Inspect extension cords periodically
and replace if damaged. Keep handles dry, clean,
and free from oil and grease. Failure to do so can
cause serious injury.
4
WARNING