Operation - LawnMaster GT1313 Manuel De L'opérateur

OPERATION

Hint for optimum use
Trimming
Adjusting cutting head angle (See Figure 9.)
Depress the button and move the shaft to the lowest position, the shaft will rotate to the 4
position, while release the button. When the shaft is in position, the button will lock into place.
Using the Flower Guard (distance bracket) (See Figure 10.)
If necessary the distance bracket can be swung down until it engages. Use the distance bracket,
for example, to cut around plants.
IF GRASS BECOMES WRAPPED AROUND STRING HEAD SHAFT:
ADVANCING STRINGS
NOTE: Trimmer is equipped with an auto-feed head.
Do not bump the head to try to advance the line will damage trimmer and void warranty.
NOTE: Auto feed function works during the starting and stopping of trimmer.
Strings will extend approximately 3/16 in. with each stop and start of switch trigger
WHILE NOT TRIMMING until the strings reach the length of the grass deflector blade.
It may take up to 10 complete starting and stoppings to advance the line.
(See Figure 8.)
Fig. 8
Fig. 9
12
Fig. 10