Technical Data - Omron i-C10 Mode D'emploi

HEM-7070-E_i-C10_main.book 44 ページ ２０１１年１１月４日 金曜日 午前１０時２０分

8. Technical Data

8. Technical Data
Product Description
Model
Display
Measurement Method
Measurement Range
Accuracy
Inflation
Deflation
Pressure Detection
Memory
Power Source
Battery Life
Operating temperature/
Humidity
Storage temperature/
Humidity/Air Pressure
Console Weight
Cuff Weight
Outer Dimensions
Cuff Dimensions
Package Content
Note: Subject to technical modification without prior notice.
• This device fulfils the previsions of EC directive 93/42/EEC (Medical Device Directive).
• This blood pressure monitor is designed according to the European Standard EN1060,
Non-invasive sphygmomanometers Part 1: General Requirements and Part 3:
Supplementary requirements for electromechanical blood pressure measuring
systems.
• This OMRON product is produced under the strict quality system of OMRON
Healthcare Co. Ltd., Japan. The Core component for OMRON blood pressure
monitors, which is the Pressure Sensor, is produced in Japan for assembly.
44
Digital Automatic Blood Pressure Monitor
OMRON i-C10 (HEM-7070-E)
LCD Digital Display
Oscillometric method
Pressure: 0 mmHg to 299 mmHg
Pulse: 40 to 180/min.
Pressure: 3 mmHg
Pulse:  5% of display reading
Fuzzy-logic controlled by electric pump
Automatic pressure release valve
Capacitive pressure sensor
84 Measurements with date and time for each user
(A and B)
4 "AA" batteries 1.5V or AC/ DC adapter (6V = 4W)
Capacity of new alkaline batteries is approx. 1400
measurements when used 6 times a day with 4 new
alkaline batteries
+10°C to +40°C
Maximum: 30 to 90% RH
-20°C to +60°C
Maximum: 10 to 95% RH
700 - 1060 hPa
Approximately 960g without batteries
Approximately 240g
Approximately 249 (l) mm  178 (w) mm  110 (h) mm
Approximately 152 mm  600 mm
(Cuff: arm circumference 22 to 42 cm)
Cuff, instruction manual, battery set, guarantee card, blood
pressure pass
= Type B
= Type B