Omron i-C10 Mode D'emploi page 26

HEM-7070-E_i-C10_main.book 26 ページ ２０１１年１１月４日 金曜日 午前１０時２０分
3. Using the Unit
5.
Press the SET button to confirm the change.
The number of seconds between each measurement is
displayed.
Note: The default value between each measurement is
60 seconds.
6.
Press the MEMORY button (
time between each measurement.
The interval can be set to 15 seconds, 30 seconds, 60 seconds
or 120 seconds. Continue to press the MEMORY button (
until the desired interval appears on the display.
7.
Press the SET button to confirm the
setting.
The year flashes on the display.
8.
Press the O/I START button to turn
the unit off.
26
) to change the interval of
)