Omron i-C10 Mode D'emploi page 27

HEM-7070-E_i-C10_main.book 27 ページ ２０１１年１１月４日 金曜日 午前１０時２０分
Using the Auto Mode
1.
Select your user ID (A or B).
2.
Press the O/I START button.
All symbols appear on the display. The user ID Symbol you
selected flashes on the display. The cuff starts to inflate
automatically.
Note: To stop the inflation or measurement, press the O/I
START button. The unit will stop inflating, start deflating
and will turn off.
3.
Inflation stops automatically and the measurement is started.
As the cuff deflates, decreasing numbers appear on the
display. The heartbeat symbol (
When the measurement is complete, the arm cuff completely
deflates.
Note: Do not move your arm and remain still until the entire
measurement process is completed.
4.
Check the progress of the consecutive measurements.
The first measurement is complete, waiting to start the next
measurement. The interval of time set between each
measurement will appear on the display.
3. Using the Unit
) flashes at every heartbeat.
EN
27