Preparation; Installing/Replacing The Batteries - Omron i-C10 Mode D'emploi

HEM-7070-E_i-C10_main.book 10 ページ ２０１１年１１月４日 金曜日 午前１０時２０分

2. Preparation

2. Preparation
2.1

Installing/Replacing the Batteries

1.
Turn the main unit upside down.
2.
Slide the battery cover in the
direction of the arrow while
pressing the ribbed part of the
cover.
3.
Install or replace four
batteries so that the + (positive)
and - (negative) polarities
match the polarities indicated
on the battery compartment.
4.
Put the battery cover back in place.
Slide the battery cover as indicated, until it clicks into place.
Note: The measurement values continue to be stored in memory even
after the batteries are replaced.
10
" "
AA size
Battery Cover