Using The Memory Function - Omron i-C10 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
HEM-7070-E_i-C10_main.book 32 ページ 2011年11月4日 金曜日 午前10時20分
3. Using the Unit
3.5

Using the Memory Function

The unit is designed to store the blood pressure and the pulse rate in
the memory for two people (user A and user B) every time a
measurement is completed.
The unit automatically stores up to 84 sets of measurement values
(blood pressure and pulse rate) for each user (A and B). When 84 sets
of measurement values are stored, the oldest record is deleted to save
the most recent values. The unit also stores 8 weeks of morning
averages and 8 weeks of evening averages for each user (A and B).
Average Function
The unit calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
Note: If two sets of measurement values are stored in the memory for
the 10 minutes period, the average is based on the two sets of
measurement values. If one set of measurement values is
stored, this is displayed as the average.
To Display the Measurement Values
1.
Select your user ID (A or B).
2.
Press the MEMORY button (
The average value is shown and the average symbol ( )
appears above the memory symbol ( ) on the display.
32
).

Publicité

Table des Matières
loading

Table des Matières