Omron i-C10 Mode D'emploi page 23

HEM-7070-E_i-C10_main.book 23 ページ ２０１１年１１月４日 金曜日 午前１０時２０分
Using the Single Mode
1.
Select your user ID (A or B).
2.
Press the O/I START button.
All symbols appear on the display. The user ID symbol you
selected flashes on the display.
The cuff starts to inflate automatically. As the cuff inflates, the
unit automatically determines your ideal inflation level. This unit
detects the pulse during inflation. Do not move your arm and
remain still until the entire measurement process is completed.
Note: To stop the inflation or measurement, press and release
the O/I START button. The unit will stop inflating, start
deflating and will turn off.
3. Using the Unit
EN
23