Maintenance; Normal Care And Maintenance - CASTLE Serenity Manuel De L'utilisateur

MAINTENANCE

NORMAL CARE AND MAINTENANCE

Due to differences in fuel, stove cleaning intervals will vary.
The cleaner the stove is, the more efficiently it will burn.
CLEANING THE FIREPOT
Remove and clean the burn pot/firepot daily. Make sure all holes
in the burn pot are unobstructed. Use a small metal pick or drill
bit to keep these holes clean. SEE FIGURE 30.
FIREPOT REMAINS
Every time the hopper is filled with fuel, the firepot should be
emptied. To empty the firepot, lift it out of the pot holder and
dump it directly into the ash pan. Be sure any build-up is removed
and that the holes are clean.
CLEANING THE GLASS
Only clean the class when the glass is cool. Wipe glass off
frequently. Wipe the glass clean with a dry or damp rag. If this
does not clean the glass, use any non-abrasive cleaner. Using
ceramic stove top cleaner can be helpful in removing soot from
the glass. Inspect gaskets around the door periodically. Replace
any worn, frayed or compacted gaskets. Replace broken glass only
with high temperature ceramic glass, available from Castle Pellet
Stoves. SEE FIGURE 31.
INTERIOR CHAMBER
Clean the interior chamber with an ash vacuum. Ash vacuums
are specially designed to contain soot and have a metal exterior.
This should be done weekly.
30
All manuals and user guides at all-guides.com
Figure 30 : Fire pot clean
Figure 31: Wipe glass and inspect gasket
Check for parts online at www.castlestoves.com or call 800-345-6007 M-F 8-5 CST
WARNING
NEVER PERFORM CLEANING OR MAINTENANCE ON A
HOT STOVE.
ALLOW UNIT TO COOL FOR A MINIMUM OF TWO
HOURS.
NEVER PERFORM SERVICE WITH POWER SUPPLIED TO
THE UNIT.
Operator's Manual
Serenity Pellet Stove