Screen Display - CASTLE Serenity Manuel De L'utilisateur

MAIN OPERATION CONTROLLER SCREEN DISPLAY
1
2
7
8
Figure 19
1. Date and Time: Displays time and date.
2. Heating Power Level: Indicates the level of power at which
the stove is currently heating.
3. Current Room Temperature/Call To Temperature:
Displays current room temperature and, in the thermostat
mode, the "call to" temperature.
4. Main Mode: Displays operation mode--weekly, thermostat
(temperature) and manual.
5. Work Stage: Displays operational stage in which the stove
is currently operating (i.e. ignite, heating room).
6. Additional Control Mode
7. Ignitor Indicator: Indicates ignition cycle/burning cycle is
currently happening.
Check for parts online at www.castlestoves.com or call 800-345-6007 M-F 8-5 CST
All manuals and user guides at all-guides.com
3
5
9 10
4
6
11 12
8. Combustion Blower Indicator: Indicates combustion
blower is running.
9. Auger Indicator: Indicates auger is feeding pellets.
10. Convection Blower Indicator: Indicates convection
blower is running and the fan is heating the room.
11. Vacuum Switch Indicator: Indicates there is vacuum
pressure in the stove.
12. Hopper Lid Open Indicator (Limit Indicator): If lit,
indicates the hopper lid is closed. When hopper lid is open,
this will disappear.
13. On/Off State Indicator: Indicates if the stove is on and in
operational mode or if it is in the process of shutting down.
Operator's Manual
Serenity Pellet Stove
13
23