Becoming Familiar With Your Controller; Controller Buttons - CASTLE Serenity Manuel De L'utilisateur

BECOMING FAMILIAR WITH YOUR CONTROLLER

Figure 17: Control pad key
CONTROLLER BUTTONS (SEE FIGURE 17)
1. Infrared Receiver: Receives signal from remote control.
(Available separately)
2. Power Indicator - Illuminates when the main power switch
is on.
3. Alarm Light - Illuminates if stove is not operating properly.
4. On/Off Button - Starts and stops operation of stove.
5. Timer Button - Allows you to choose the start time or
shutdown time of the unit.
6. Mode Transfer Button - Allows you to set the unit to one
of three main mode settings: Manual, Temp, and Weekly.
7. Hold Button - Pressing the "Hold" button in weekly mode
after raising the "Call To" temperature will maintain that
temperature until the button is pressed again or the stove
is shut down.
8. Scroll Up Button - Allows you to scroll up to choose items
in the menu.
9. Exit Button: Takes you out of current selection and returns
to previous option and/or screen. When entering data,
pressing the EXIT button will also delete your entries.
10. Scroll Down Button - Allows you to scroll down to choose
items in the menu.
11. Enter Button - Pressing "Enter" button allows you to
adjust and select data on the screen. Pressing the ENTER
button for two seconds will take you to a main menu
screen in which you'll have the ability to change the time,
date, temperature display, weekly operation schedule (for
Weekly Mode only) and combustion motor and voltage
settings.
22
All manuals and user guides at all-guides.com
1
4 5
2
6 7
3
Check for parts online at www.castlestoves.com or call 800-345-6007 M-F 8-5 CST
8
11
10
Figure 18: Control pad location
Operator's Manual
Serenity Pellet Stove
9