Wheels Assembly; Maintenance - Look 796 MONOBLADE RS Notice D'instructions

Fig. 39
Note : Turning the head back or changing the model moves your saddle purely horizontally.
Therefore, it will have a very small effect on your saddle height. It can be necessary to
remove/add a few millimetric shims to find your exact saddle height again.
Follow the manufacturer's fitting instructions. Our fork dropouts are designed with safety tabs.
Always clean your frame with soap or a light detergent and water. Use a soft cloth. Rinse your frame
with water and dry with a cloth. Do not use a pressure washer or any abrasive products. To eliminate
tar stains, use a product for car finishes. We recommend a service maintenance visit after the first
500km of use. The first maintenance is an opportunity to proceed with small adjustments which will
improve the safety, performance and life span of your new bicycle. May it be free or payable, it is
generally suggested by our dealers. We strongly advise at least one periodic maintenance by your
retailer.
SERVICING AND MAINTENANCE ARE IMPORTANT FOR YOUR SAFETY AND LIFEASPAN OF YOUR
BICYCLE.
POORLY MAINTAINED BIKE PARTS CAN BREAK OR MALFUNCTION, WHICH COULD LEAD TO AN
ACCIDENT WHERE YOU CAN BE KILLED, SEVERELY INJURED OR PARALYZED.
Masse (g)
Dessiné par
Vérifié par

WHEELS ASSEMBLY

Nature de la modification
ECHELLE 2:5
FORMAT A4
Date
Date

MAINTENANCE

Matière
ENSEMBLE
ATS-003
DESIGNATION
Réglage recul
Resp Date
Traitement
REFERENCE PROTO.
REFERENCE
EN
Ind.
46