Look 796 MONOBLADE RS Notice D'instructions page 82

EN
There are 3 possible positions for the armpad spacing on the 796 depending on the location of
the screws.
- in to obtain 195 mm centre to centre spacing
A
- in to obtain 165 mm centre to centre spacing
B
- in to obtain 135 mm centre to centre spacing
C
«Armpad STACK» height adjustment
Volume (mm3) Masse (g)
The AEROFLAT BAR is delivered with a set of parts allowing different armpad heights to be
272684.69 387.73
obtained.
Dessiné par
P.BIGARD
Vérifié par
All information contained on this drawing is property of LOOK CYCLE INTERNATIONAL. Its reproduction for any use in any way or for commercial
purpose is forbidden. All rights on this material are reserved.
33
Center to center with screw in
A : 135mm
B : 165mm
C : 195mm
C
B
A
C
B
A
Nature de la modification
ECHELLE 1:3
FORMAT A4
Date
18/03/2016
Date
POSITIONNEMENT REPOSES COUDES
2&3 : pads centered
1&2 : REACH +20mm
3&4 : REACH -20mm
Matière
ENSEMBLE
ACT-001
DESIGNATION
1
2
3
4
1
2
3
4
Resp Date
Traitement
REFERENCE PROTO.
REFERENCE
Ind.