HOLZMANN MASCHINEN BS 115 Mode D'emploi page 47

Example of a perfect adjustment of the bandsaw blade guide:
The bandsaw blade has too much play and is
therefore still cant between the lateral bearing
rollers.
CAUTION:
Before tightening the bandsaw blade guide examine
whether the saw band is below set perfectly vertical and
readjust the bandsaw blade guide according vertically.
The bandsaw blade guide with the screw for fixing
tighten.
NOTE: Check the 90 ° bandsaw blade guide with an angle gauge or with a rectangular
workpiece.
Repeat this process on the right if the saw band saw blade guiding is not performed exactly
vertical.
NOTE: The bandsaw blade guide slide (left / right) as close as possible to the workpiece.
By loosening the fixing nuts (12), the blade guides
can be moved.
CAUTION: Bevel cuts are resulting from not exactly vertical set saw blade guides and
too much play between the lateral bearing rollers!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
The saw blade is completely vertically without
any play between the lateral bearing rollers.
OPERATION
47
BS115 / BS128HDR