HOLZMANN MASCHINEN BS 115 Mode D'emploi page 40

HOLZMANN MASCHINEN GmbH
4. Insert the handle into the holes on the base frame and
secure it with a cotter pin on each side.
5. place the machine on the base frame. Secure with 6
screws, washers, spring washers and nuts..
6. Fasten the handwheel (1) to the shaft of the vice using
a grub screw (2). Fix the switch box (4) to the
machine using the 2 screws (3).
7. The belt box (1) is attached to the machine by means
of the two screws (2) on the inside and the screw (3)
on the outside.
www.holzmann-maschinen.at
NOTICE
For this assembly step 2 persons are
necessary. The motor should be placed on
the side of the wheels.
ASSEMBLY
40
BS115 / BS128HDR