Scope Of Delivery; Transport - Abicor Binzel MF1 Mode D'emploi

MF1/2
3.3 Safety symbols marking

4 Scope of delivery

• MF assembly
• Robot mount
Optional:
• Gear (having the appropriate gear ratio)
• ABK interface
Tab. 7
Scope of delivery

4.1 Transport

Checking procedure
on receipt of goods
In case of damage
In case of complaints
Packaging for
returning the goods
Tab. 8 Transport
Further measures can be found in the "Power supply" operating instructions or
in the documentation of further peripheral devices.
The safety symbols listed below are attached to the wire feeding system MF1/
2 in clearly visible and legible form.
Symbol
The master feeder MF1/2 forms part of the entire system. Order the equipment
parts and wear parts separately. Order data and part numbers for the
equipment parts and wear parts can be found in the current ABICOR BINZEL
spare parts and wear parts lists. The contact for consulting and ordering can
be found in the Internet at www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Meaning
Crushing of fingers!
• Operating instructions
• VTS-Interlock standard interface
4 Scope of delivery
EN - 7