Safety Instructions; Emergency Information - Abicor Binzel MF1 Mode D'emploi

3 Safety Instructions

2.5 Marking
Standard transmission ratio
MF1 i= 15 stamped
MF2 i= 21 stamped
Tab. 6 Marking
3 Safety Instructions
3.1 Classification

3.2 Emergency information

EN - 6
When making any inquiries, please remember the following information:
• Device types MF1 or MF2
• Milled device number
Please observe the attached document Safety Instructions.
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
DANGER
Describes imminent threatening danger. If not avoided, it will result in fatal or
extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
• Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.
In case of emergency, immediately interrupt the following supplies:
• Power
Special transmission ratio
MF1 i= 30 stamped
MF2 i= 40 stamped
MF1/2