Warning And Notice Signs; Basic Safety Instructions - Abicor Binzel ABICOOLER 1300 115 CSA Mode D'emploi

ABICOOLER 1300 115V CSA

2.3 Warning and notice signs

The following warning, notice and mandatory signs can be found on the product:
These markings must always be legible. They may not be covered, obscured, painted over, or removed.

2.4 Basic safety instructions

The product has been developed and manufactured in accordance with state-of-the-art technology and the
recognized safety standards and regulations. Inevitable technical residual risks to the user, third parties,
devices, or other material property are posed by the product. The manufacturer will accept no liability for
damage caused by non-observance of the documentation.
► Before using the system for the first time, please read the provided documentation carefully.
► Do not operate the product unless it is functioning properly and ensure compliance with all documents.
► Before carrying out specific work, for example, commissioning, operation, transport and maintenance,
► Use suitable means to protect yourself and bystanders from the hazards listed in the documentation.
► Store the documentation within easy reach of the device for reference and enclose all documents when
► Consult the documentation for additional welding components.
► Information about how to handle gas cylinders can be found in the instructions provided by the gas
► Observe the local accident prevention regulations.
► Only trained specialists should commission, operate, and service the device. Qualified personnel are
► Keep the work area in order. Ensure good lighting of the work area.
► Switch off the power supply, gas supply, and compressed air and unplug the power plug for the entire
► For disposal, observe the local regulations, laws, provisions, standards and guidelines.
Safety instructions for electrical components
► Check electric tools for damage and for its proper functioning in accordance with its designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
► Wear face protection.
Warning against hot surfaces. Risk of burns.
► Do not touch hot surfaces.
Electrical voltage caution. Danger of electric shock.
► Only a trained electrician should open the device.
► Interrupt the electrical power supply before opening the
device.
Risk of burns and irritation of the skin due to spraying coolant.
► Keep the coolant tank closed during operation.
Fuse Size
read the documentation carefully.
passing on the product.
manufacturer and the relevant local regulations, e.g., regulations that apply to compressed air.
persons who, based on their special training, knowledge, experience and due to their knowledge of the
relevant standards, are able to assess the tasks assigned to them and identify possible dangers.
duration of maintenance, commissioning, and repair activities.
2 Safety
EN - 5