Maximum pollution degree
Overvoltage category
Measurement category
Climatic sequence
Shock resistance
Vibration resistance
Connections
Terminal type
Cable cross section (min... max)
UL Rating: Cable cross section (min... max)
Tightening torque
Housing
Version
Material
Degree of protection
Weight
Certifications and compliance
cULus
Reference standards
UL Marking
INFORMATION AND TECHNICAL SERVICE
Sales Department:
Technical Service:
Auxiliary supply connected to a line with a phase-neutral voltage ≤300V
sales@icar.com
tech.cv@icar.com
Document: 5LGA operating manual (cod. 10098511); Rev.:3; Date: 06/04/2016
2
3
III
Z/ABDM (IEC/EN 60068-2-61)
15g (IEC/EN 60068-2-27)
0.7g (IEC/EN 60068-2-6)
Plug-in / removable
0.2...2.5 mm² (24...12 AWG)
0,75...2.5 mm² (18...12 AWG)
0.56 Nm (5 LBin)
Flush mount
Polycarbonate
IP54 on front - IP20 terminals
350g
Pending
IEC/EN 61010-1, IEC/EN 61000-6-2
IEC/ EN 61000-6-4
UL508 and CSA C22.2-N°14
Use 60°C/75°C copper (CU) conductor only
AWG Range: 0,75...2.5 mm² (18 - 12 AWG) stranded or solid
Field Wiring Terminals Tightening Torque: 0,5Nm ( 4.5lb.in)
Flat panel mounting on a Type 1 enclosure
p. 40 / 60