Publicité
Les langues disponibles
Les langues disponibles
•
Filter shaker button (fig. C, ref. 4): enables the filter shaker.
•
Battery charge LED (fig. C, ref. 5): 3 LEDs indicating the battery charge:
•
green light: battery fully charged
•
yellow light: battery almost flat, recharge
•
red light: battery flat
•
Suction LED (fig. C, ref. 9): indicates the suction status ON/OFF.
•
Center brush pressure regulation handle (ref. 8): regulates the pressure of the brush on the floor.
•
Drive knob (ref. 9): enables the drive of the machine.
•
Front flap raising knob (ref. 10): raises the front flap to collect bulky debris.
•
Side brush lifting lever (ref. 11): raises and lowers the side brush.
•
Brake (ref. 12): parking brake
Fitting The Side Brush
This operation must be performed with the machine off and key removed
Proceed as follows:
1.
Lift the front of the machine.
2.
Fit the brush and fix it in place with the washer and screw provided (fig D, ref. 1).
3.
Unscrew the two screws (fig. E, ref. 1), adjust the height of the brush and tighten the screws again.
8
D
E
Publicité
