Publicité
Les langues disponibles
Les langues disponibles
•
The machine must not be used for purposes other than those for which it was expressly designed. Scrupulously respect all
safety standards and conditions applicable to the type of building in which the machine is to be operated (eg: pharmaceutical
companies, hospitals, chemicals, etc).
•
DO NOT use the machine in places with inadequate lighting or explosive atmospheres, on public roads, in the presence of dirt
hazardous to health (dust, gas, etc) and in unsuitable environments.
•
The machine is designed for use at temperatures of between +4°C and +35°C. When the machine is not being used, the
temperature range is +0°C and +50°C.
•
The machine is designed to work in a humidity of between 30% and 95%.
•
NEvER pick up flammable liquids or explosives (eg. petrol, fuel oil, etc), acids and solvents (eg. paint solvents, acetone etc.).
NEvER pick up flaming or incandescent objects.
•
NEvER use the machine on slopes or ramps of more than 2%. In the case of slight slopes, do not use the machine transversally,
always maneuver with care and do not reverse.
•
When transporting the machine on steeper ramps or slopes, take the utmost care to avoid tipping up and/or uncontrolled
acceleration.
•
NEvER park the machine on a slope.
•
The machine must never be left unattended with the motor on. Before leaving it, turn the motor off, make sure it cannot move
accidentally.
•
ALWAyS pay attention to other people, children in particular, present in the place where you are working.
•
NEvER use the machine to transport people or things or to tow anything not permitted by the manufacturer. Do not tow the
machine.
•
NEvER rest objects of any weight on the machine for any reason.
•
NEvER obstruct ventilation and heat dispersion slits.
•
NEvER remove, modify or circumvent safety devices.
•
Numerous unpleasant experiences have shown that a wide range of personal objects may cause serious accidents. Before
beginning work, remove jewelry, watches, ties, etc.
•
The operator must always use personal protection devices: protective apron or overalls, non-slip waterproof shoes, rubber
gloves, protective goggles and ear protectors and mask to protect the respiratory tract.
•
Keep the hands away from moving parts.
•
In the case of malfunction and/or faulty operation, turn the machine off immediately and do not tamper. Contact a service
center authorized by the Manufacturer.
•
All maintenance operations must be performed in an adequately lit place.
•
All work on the electrical system and all maintenance and repair operations other than those explicitly described in this manual
must be performed by specialized personnel expert in the sector only.
•
Only original accessories and spare parts supplied by the Manufacturer may be used in order to guarantee safe problem-free
operation of the machine. Never use parts removed from other machines or from other kits.
•
This machine has been designed and constructed to provide ten years' service from the fabrication date shown on the rating
plate. After this time, whether the machine has been used or not, it should be disposed of according to current legislation in
the country in which it is used:
•
The product is classified as WEEE type special waste and is covered by the requisites of the new environmental protection
regulations (2002/96/CE WEEE). It must be disposed of separately from ordinary waste in compliance with current legislation
and standards.
Special waste. DO NOT dispose of with ordinary waste.
•
•
If you decide to stop using the machine, you are recommended to remove the batteries and dispose of them at an authorized
collection center.
•
You should also make sure that all parts of the appliance which could represent a hazard, particularly to children, are made safe.
Handling And Installation
Lifting And Transporting The Packaged Machine
During all lifting operations, make sure the packaged machine is firmly anchored to avoid it tipping up or being accidentally dropped.
Always load/unload lorries in adequately lit areas.
The machine, packaged on a wooden pallet by the Manufacturer, must be loaded using suitable equipment. A fork lift truck must
always be used to lift the packaged body of the machine. Handle with care to avoid knocking or overturning the machine.
5
Publicité
