Publicité
Les langues disponibles
Les langues disponibles
•
Brush button (ref. 3): enables/disables brush operation.
•
Filter shaker button (ref. 4): enables the filter shaker.
•
Battery charge LED (ref. 5): 3 LEDs indicating the battery charge:
•
green light battery fully charged
•
yellow light battery almost flat, recharge
•
red light battery flat
•
Center brush pressure LED (ref. 6): 6 LEDs indicating the pressure of the center brush on the work surface. The pressure exerted
by the brush on the floor is calculated by means of the current absorbed by the center brush motor:
•
green lights, light pressure
•
yellow light, medium pressure
•
red light, heavy pressure
•
If the red light (LED 6) comes on, all LEDs start flashing.
Note: Two minutes after the red light comes on, the brush function is shut down automatically.
A
•
Center brush pressure regulation handle (fig. A, ref. 8): regulates the pressure of the brush on the floor.
•
Accelerator knob (fig. A, ref. 9): sets the speed of the machine.
•
Front flap raising knob (fig. A, ref. 10): raises the front flap to collect bulky debris.
•
Side brush lifting lever (fig. A, ref. 11): raises and lowers the side brush.
•
Direction selector (ref. 7): sets movement of the machine to forwards or reverse.
•
Display (ref. 8): displays alarm codes.
•
Brake (fig. A, ref. 12): parking brake (ACTIVATED VIA THE WHITE LEVER) and service brake.
Controls – Description 512-712
C
The machine has the follow controls and indicator lights:
•
On/OFF switch (fig. C, ref. 1): turns the machine on and off.
•
Suction button (fig. C, ref. 2): enables/disables the suction function.
7
Publicité
